Ring & Pinion Gears | Posi-Tractions | Sway Bars | Custom Flywheels | Clutches | Custom Axles | Spools | All Rear End Components
Early Pontiac Clutch Linkage | Pontiac "SuperDuty" Parts and MORE!

Specializing in the '57-'64 Pontiac/Oldsmobile 9.3" Rear End

1957-1964 Pontiac/Oldsmobile 9.3" Rear End Pro-Built Third Member/Center Section with New Trophy Track 31 Spline Limited-Slip and New Ring & Pinion Gear Set by Vintage Gears


1957-1964 Pontiac/Oldsmobile 9.3" Rear End Pro-Built Third Member/Center Section with New Trophy Track 31 Spline Limited-Slip and New Ring & Pinion Gear Set by Vintage Gears





1957-1964 Pontiac/Oldsmobile 9.3" Rear End Pro-Built Third Member/Center Section with New Trophy Track 31 Spline Limited-Slip and New Ring & Pinion Gear Set by Vintage Gears


PRO-BUILT 1957-1964 PONTIAC/ OLDS 9.3" REAR END THIRD MEMBER WITH TROPHY TRACK 31 SPLINE LIMITED-SLIP/POSI
YOUR CHOICE OF GEAR RATIO USING A
 NEW FA
BCRAF
T RING & PINION GEAR SET

THIS IS A FABCRAFT BLUEPRINT STYLE BUILD OF AN OLDS/PONTIAC 9.3" REAR END CAST-IRON THIRD MEMBER CASE  - BUILT WITH THE ATTENTION TO DETAIL  "THAT WROTE THE BOOK"

READY FOR INSTALLATION
INTO YOUR 1957-1964 OLDS 9.3" or PONTIAC 9.3" AXLE TUBE HOUSING !!!!
THESE FRESHLY BUILT UNITS INCLUDE:
- NEW FABCRAFT TROPHY TRACK 31 SPLINE
    LIMITED-SLIP CARRIER  (Made in the THE USA &
     PROVING TO BE THE TOUGHEST POSI UNIT EVER FOR
     THE 9.3")  ASK ABOUT THE TROPHY TRACK CHECKERED
     FLAG WARRANTY

- NEW VINTAGE GEARS (by FABCRAFT) RING &
     PINION GEAR SET -- Made in the USA
- NEW ARP RING GEAR BOLTS
- NEW PINION BEARINGS AND RACES
- NEW CARRIER BEARINGS AND RACES
- NEW PINION SHIMS
- NEW PINION SHAFT SOLID SPACER (REPLACES
    STANDARD CRUSH SLEEVE)
- NEW PINION SEAL
- NEW PINION NUT
- SHOT-PEENED OEM CAST-IRON CASE (Drop-out
    Center Section)
- SHOT-PEENED & CAD-PLATED SIDE ADJUSTERS &
    LOCKS
- POLISHED & CAD-PLATED OEM PINION YOKE
- NEW SOFT PLUG
- NEW BRASS FILL PLUG
- NEW THIRD MEMBER AND AXLE FLANGE GASKETS
- NEW AXLE SEALS
- SPECIAL FRICTION ADDITIVE FOR YOUR NEW
    TROPHY TRACK LIMITED-SLIP
- TROPHY TRACK OWNER'S HANDBOOK
- NEW GEAR SET & THIRD MEMBER BREAK-IN
    INSTRUCTIONS

WE CAN BUILD A UNIT FOR YOU WITH THE THIRD MEMBER CASE PAINTED IN THE COLOR OF YOUR CHOICE (within reason) .... AND WITH FACTORY STYLE COLOR DAUBS/CODES

WANT A PERFORMANCE BUILD WITH EVEN MORE MUSCLE ? ...WE CAN BUILD YOURS WITH OPTIONS LIKE A BILLET MAIN CAP AND BILLET "1350" YOKE WITH BILLET STRAPS (GIRDLES) (call us for details and costs ) ...OR IF YOU ARE GETTING
REALLY RACY  AND WANT TO GO ALL OUT ... ASK ABOUT OUR COMPETITION 31 OR 35 SPLINE SPOOL EQUIPPED THIRD MEMBER BUILDS  - AND OUR 5.14 AND DEEPER GEAR SETS !!

PRICING SHOWN INCLUDES YOUR CHOICE OF GEAR RATIO - USING A NEW MADE IN THE USA VINTAGE GEARS BY FABCRAFT PERFORMANCE GEAR SET - AVAILABLE IN:  3.42 / 3.64 / 3.90 / 4.10 / 4.30 / 4.56 / 4.88* RATIOS
* 4.88 RATIO = CURRENTLY HAS A SLIGHTLY HIGHER TOTAL COST


IMPORTANT NOTE -- WE ARE HERE TO TEAM-UP WITH YOU ON YOUR GEAR RATIO CHOICE AND ANY SPECIAL ITEMS YOU NEED FOR YOUR PROJECT -- SO BE SURE TO
CALL OR EMAIL US BEFORE PURCHASE -- OR WITH ANY QUESTIONS YOU MIGHT HAVE.
WE WILL ALSO EXPLAIN SHIPPING COSTS AND CORE TRADE-IN RATES/REQUIREMENT
S - PRICING SHOWN DOES NOT INCLUDE SHIPPING AND IS BASED ON YOU NOT TRADING IN A CORE 3RD MEMBER CASE - SO TRADING IN AN ACCEPTABLE CORE WILL LOWER YOUR TOTAL COST !!


DON'T FORGET.... WE ALSO BUILD CORRECT CUSTOM AXLES FOR '57-'64 PONTIAC/OLDS 9.3" REAR ENDS WITH FEATURES OTHERS DO NOT INCLUDE -- AND WE HAVE BOLT-ON DISC BRAKE KITS FOR THE 9.3"  


QUESTIONS ??   GIVE US A CALL OR EMAIL US
    FABCRAFT 800-208-8242              
                    MON-THUR 9AM TO 530PM CENTRAL TIME






Price:
Quantity: